DIVERSEY VIREX II 256
Broad spectrum environmental cleaner & disinfectant
Virex II 256 is a high level disinfectant for disinfection of surfaces and critical instruments (which come in contact with the blood stream or normally sterile areas of the body, such as rigid and flexible surgical instruments) in healthcare application.
- Didecyl dimethyl ammonium chloride : 8.7%
- n-alkyl dimethyl
- benzyl ammonium chloride : 8.19%
- Lauryl dimethyl amine oxide
- Ethylene diamine tetra acetic acid sodium salt
- Sodium bicarbonate
Features and benefits
- N-alkyl dimethyl benzyl ammonium & Didecyl dimethyl ammonium chloride - Combination of most potent QAC's - Broad spectrum kill
- Aldehyde free product - No negative occupational hazard - Eco friendly and user friendly
- Cleaner and disinfectant - Single shot product - Time and cost effective
Directions for use FOGGING:
Prepare 1% v/v solution (10ml of Virex II 256 in1 litre of water) & transfer the solution in the fogging machine. Wet surfaces of tiled walls, trolleys, Operation tables & floors evenly. Close rooms & allow to dry for 1 hour.
Instrument disinfection : Use 10% solution (100 ml in 1 litre)
High level disinfection - Soak completely inside the Virex II 256 solution. For semi-critical instruments disinfection, 30 minutes of contact time is required.
Sterilisation - For sterilisation 10 hours of contact time is required. Avoid bubble formation. Use a plastic recipient and this should be closed during all the time instruments are soaked in. Take off all the instruments and rinse with sterile water or 0.9% Na Cl solution in sterile water.
Operation theatres and critical care areas - Use 0.4%(1:256) solution (4 ml in 1 litre of cold water). Wash floors and other tiled surfaces taking care to cover corners and other inaccessible areas
Compatible with most metals and surfaces used in hospitals.
When used as directed at a 1 : 256 dilution (1/2 oz. per gallon of water) Virex II 256 contains 660 ppm of active quaternary germicide making it highly effective against a wide variety of pathogenic microorganisms.
Using approved AOAC test methods under Good Laboratory Practices, in the presence of 400 ppm hard water, 10% serum load and 10 minutes contact time, unless oterwise noted, Virex II 256